Spiral Flute Taps | Spiral Flute Taps Manufacturers | DIC Tools

We are a Manufacturer of Spiral Flute Taps in India which are primarily used for threading blind holes. The taps are designed to productively draw chips up and out of the hole and toward the shank when tapping blind holes, deep holes, and keyway holes. It has a flute that wraps around the tap axis in a spiral or a helical configuration. The spiral Flute Taps evacuate the chips out of the hole cleanly to make sure that no chips remain in the hole.

Product Specification:

• Material: HSS M2, M42, Solid carbide.
• Head Type: Metric and Imperial head.
• Suitable for use on materials such as Aluminum, Brass, Copper, etc.
• Helix Angle: 52 Degree

Top Slitter Knives | Slitter Knives Manufacturers | DIC Tools

 Top Slitter Knives are used to efficiently cut paper, foil, rubber, tape, films and boards. Top Slitter Knives are made from high grade material that is obtained from trusted vendors. Its highly demanded by our customers for their rigid construction, tensile strength, and sharpness. These Knives are available in all various shapes, sizes for all types of slitting operations. These Knives are highly polished, super honed and has precision cutting edges.

Features:

• Highly polished, super honed, precision cutting edges.
• Outer Diameter: 80mm
• Inner Diameter: 40mm
• Clean and Dust Free slitting.

For more info visit: www.dictoolsindia.com

Bottom Slitter Knives | Bottom Slitter Knives Manufacturers

 Bottom Slitter knives are harder than the top slitter knife preventing the usual burr from forming on the top knife during high-speed slitting. The bottom knife is just as important as the top slitter knife. Multi Groove Knives are available with a single cutting edge or double cutting edges. We Offer these Bottom Slitter Knives in a wide range of specifications at affordable prices. The Sharp Cutting Edge combined with the precision mirror finish creates a dustless cut time after time. The bands are made from high-grade carbide steel to give higher performance.

Product Features:

Material: 52100, D3, D2, TC Tipped, mostly D2 material is used for single edge bottom slitter knives.

Application/usage: For Slitting paper

Clean and Dust Free slitting.

Highly polished, super honed, precision cutting edges.